Questions about servo savers

[newnitrofan]

Ummm so what happens when a servo saver go's bad??? Will it pop out screws of the servo horn. I can't seem to keep one in right at the moment it's starting to upset me pretty bad. Help

 

[jon2]

Is the screw coming out or is the servo horn coming off the adapter if you use one? I had a similar prob on a servo saver. I had the wrong spline adapter.

 

[newnitrofan]

The screw keeps coming loose for some reason. Just bought a brand new HI tec 645 and the screw keeps backing out. The spline adapter is right as far as I know. I am using an ofna servo saver.

 

[Maxxcrazy88]

My 645 did that too, I put in some locktight and its been fine ever since, got real old having to stop and tighten my steering every tank(you know what the savage steering is like)...

 

[olds97_lss]

I use a little bit of locktight as well. Just the blue stuff. Don't use to much or it may ooze out into the bearing in the top of the servo.

 

[jon2]

The threadlock is a good idea so long as it doesn't get on anything that is not metal. It will weaken it. As far as I know all sounds good. The screw backing out.. is the servo saver all the way in? Make sure that the servo horn is on snug. Let us know.