• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

please help on tuning

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

janniman

RC Newbie
Messages
9
Reaction score
0
Points
0
Location
manchester
RC Driving Style
can any of you guys help me i have a rush evo but I'm having problems fine tuning when i go to open the throttle fully the engine starts to die on me.
can someone help me please.
cheers.
 
It sounds like you are running rich on the top end. Try leaning your HSN just a hair and try it again.

Tom
 
Got to the factory settings and tune from there. And a trick that I learned is put you rc on something to get the wheels off the ground and line up your screwdriver with the high speed screw and give it full throttle and turn the needle. There is no need to turn slow and you don't want the car to be srceaming nor bogging. And don't be wot for long 'cause that can cause engine damage.
 
i had the same issue with my rc10gt. i kept adjusting the low speed screw and it wasn't helpin so i det it back where it was and gave the highspeed like an 8th of a turn boom ran great.. i think I'm still rich tho for sure on the low speed but can seem to get it to quit running rich and idling high i can turn my idle adjust meant down anymore otherwise it wont have enough air to run.. but it spits fuel out as is now.. oops sorry not tryin to steal your thread here bud. but yeah i agree with godale.. try that.
 
Back
Top