• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Perpetual motion puzzle

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Mrs. X gave me the AR15 two Xmas' ago. I still haven't assembled it 😕
So........the more I'm reading this thread, the more I'm convinced I'll be saving my AR puzzle for retirement. What's another 13 years?!
 
Four hours today, it's getting pretty tough and fragile.

#2.webp

6 Hours.webp
 
I rolled a marble down the track in the areas that are complete and even after sanding the parts a little bit,
it hangs up some but I'll work on that when it's finished.
 
I rolled a marble down the track in the areas that are complete and even after sanding the parts a little bit,
it hangs up some but I'll work on that when it's finished.
If only you'd taken more time and been more meticulous... :doh:

:hehe:
 
If only you'd taken more time and been more meticulous... :doh:

:hehe:
Seriously, @Littlemotor would have double sanded each part after beveling the edges, then adding a coat of varnish before assembly. I just can't even look at you right now. 😜
 
There was actually some parts missing, when I finished it, there was no driveshaft for the sphere.
I there was some extra gears so I built a drive shaft with two gears to go between the motor
gear and the sphere gears.
 
That was quick! Pretty dang cool. 😍

Now you need to build a rollercoaster, maybe quarter scale. 😜
TF should be able to make a killer wood coaster and with Doom as a test pilot... 🤪
 
Back
Top