• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Os.21 vzb vz-b v-spec-t engine

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
No, they bump start only.
You need the O.S 21TM, it will work with the EZ-Start and stock engine mount.
 
Scrogg said:
No, they bump start only.
You need the O.S 21TM, it will work with the EZ-Start and stock engine mount.
Click to expand...


Although it's only about 1/2 the power of a V-Spec. But the 21TM is really all you need in a Revo. With a 21TM and a good pipe (I ran a THS in mine) You can really get that thing movin'. I run a V-Spec in my Truggy and Buggy and Dayum! It's a rocket.
 
i had a .18TM in a revo and it was badass, I'm sure the .21TM is more then enough , and i have a TM523 with mount for a revo up for grabs
 
Is the .21 v spec a drop in motor and can i put a pull start on it. I would like to put a .26 max on it but i want more control of the car. Also what about the picco .21?
 
V-specs are bump-start only. They are WAY too much engine for a Revo.
A well tuned 18TM or TZ, 21TM with a THS pipe is all you need.
I had to back off my slipper a lot to keep from stripping tranny gears.
 

RC Builds

Back
Top