ordered parts to convert my rs4 SS to an MT2 (somewhat)

[alkyula]

i thoroughly checked both manuals and compared part numbers for the rs4 SS and the mt 2 and found that i was able to use the suspension parts for the Mt 2 on my rs4..and that i would only have to modify a small portion of the chassis to make it work. i oredered everything that had to do with the suspension, arms, blocks, uprights, shocks, towers, and cost me about 130$. the parts will be here latr this week ill follow up on the results.

why did i do that? my rs4 SS has jsut sat on the counter for months...on-road isnt fun to me.i figure id change into sometihing i can run on the track..should be more fun.

 

[SokuShi]

you might have to change your gearing a bit for more torque so you can power through dirt,

 

[alkyula]

yes i have also included the lower 2-speed pinion gears that i could find..but only was able to go down 1 tooth for the high and low pinion gears..which i hope will be enough..uness someone knows were i can get other threaded pinions that work with hpi spur gears which smaller than 17 and 21 teeth.