Old Losi Rc identifcation

[Dudley220]

Well I’ll keep you guys posted what I find

 

[Dudley220]

Ok guys the tires worked I pull them off the rims they were not glued so on to the next step

Ok so I have it driving now no steering and it it normal for the esc to make noise

 

[Dudley220]

Ok so I figured out the clicking it’s the steering servo looks like it’s 25 spline I’m wondering if this servo can replace it I see most servos are two screw these are 4

NEW HPI SAVAGE XS MINI FLUX Servo SS20-WR +Servo Saver HXS10

Also what are people running for battery’s in these

 

[Greywolf74]

Ok so I figured out the clicking it’s the steering servo looks like it’s 25 spline I’m wondering if this servo can replace it I see most servos are two screw these are 4

NEW HPI SAVAGE XS MINI FLUX Servo SS20-WR +Servo Saver HXS10

Also what are people running for battery’s in these

View attachment 152753

View attachment 152754

As long as the servo fits in the kit or is roughly the same dimentions as the existing servo then it should work. Provided they are the same spline count.

As for battery, Any 2S lipo that will fit in it will work.

 

[Dudley220]

Ok I think I found what I need last thing is a body any ideas on what I could make fit I also need two body posts

 

[Greywolf74]

Only thing I can say there is ebay for the body posts and try other 1/18 scale bodies especially from other 1/18 Losi kits like the Mini-T or the Mini LST2.

 

[Dudley220]

How about a body like this

Dromida Body Gray & Yellow MT4.18

 

[Greywolf74]

How about a body like this

Dromida Body Gray & Yellow MT4.18

That body is 9.8 inches long. I dont think that entire mini High Roller is that long is it?

What I would do is google up a link to the original body that has the dimensions of the body and then try and find a body with roughly the same dimensions. Especially the wheelbase.

 

[Dudley220]

Well that steering servo was full size any other ideas

 

[Greywolf74]

Well that steering servo was full size any other ideas

Find out what the dimensions of your existing servo are and look for something about the same size. Savox has MINI servos and MICRO servos. You can probably find something close there.

 

[Dudley220]

Well this is how it turned out guys

 

[Greywolf74]

Looks good! glad you were able to get it running again