O-rings for Picco .26max

[Boomwestlos]

Wassup I'm Ray. My picco .26max is in need of O rings for the low speed needle.

Does anybody know where i can purchase?

 

[Z.hb71]

Wassup I'm Ray. My picco .26max is in need of O rings for the low speed needle.

Does anybody know where i can purchase?

Just measure the inner diameter, then the thickness, then the outer diameter with a digital calipers, and then Google that, then make sure you buy a neoprene, edpm or and meterial because if you buy standard rubber o rings, the methanol and alcohol in the fuel will make them deteriorate and go bad very very quick.

 

[Boomwestlos]

Just measure the inner diameter, then the thickness, then the outer diameter with a digital calipers, and then Google that, then make sure you buy a neoprene, edpm or and meterial because if you buy standard rubber o rings, the methanol and alcohol in the fuel will make them deteriorate and go bad very very quick.

Thanks for your help i will try that

 

[Z.hb71]

Thanks for your help i will try that

No problem, lemme know if you find anything, if not just give me the measurements and I'll see if I can manage to find anything ?

 

[olds97_lss]

Found the HSN ones, but not the LSN:
https://www.nitrohouse.com/Picco-6070-0-Rings-for-Main-High-Speed-Needle-OFNA-51402_p_8793.html

Parts explosion:
http://www.manualsdir.com/manuals/650195/ofna-racing-picco-26-max.html

Worst case, you might be able to find an alternate carb that is still serviceable. The OS 11K carb fits in the TRX3.3, not sure if it's the same neck dimension or not. Pricey, but tunes well.
https://www.amainhobbies.com/o.s.-carburetor-11k-slide-18tz-21tm-osm21982000/p653932

 

[Boomwestlos]

Thank you for the help