Citrix
RC Newbie
- Messages
- 12
- Reaction score
- 0
I'm completely new to nitro and am trying to do as much research as possible before I pull the trigger. One thing I'm confused about is the starting process of the nitro, and I was wondering if y'all can explain it to me a bit.
I'm building a kyosho inferno gt3 as I want a nitro and an on road since the only things I've ever done are off road electric. This kit calls for a...
Multi Starter Box2.0 36209
Plug/Cross wrench
Plug heater | Boost charger 2.0
Spark booster
Battery | Speed house 7.2V 36HV Ni-MH Battery
This is on top of the battery plugged in for the receiver as well as everything else the engine needs to run (Glow plug, which I'm also confused about and would appreciate an explanation on as well, and Nitro fuel)
Is there anything else I need to run the car on top of the engine and pipe, receiver and transmitter, 2 servos, receiver, and battery, as well as the things I've listed above?
I'm building a kyosho inferno gt3 as I want a nitro and an on road since the only things I've ever done are off road electric. This kit calls for a...
Multi Starter Box2.0 36209
Plug/Cross wrench
Plug heater | Boost charger 2.0
Spark booster
Battery | Speed house 7.2V 36HV Ni-MH Battery
This is on top of the battery plugged in for the receiver as well as everything else the engine needs to run (Glow plug, which I'm also confused about and would appreciate an explanation on as well, and Nitro fuel)
Is there anything else I need to run the car on top of the engine and pipe, receiver and transmitter, 2 servos, receiver, and battery, as well as the things I've listed above?