Nitro slash

[Ckuhn3602]

While running my nitro slash it will just stay full throttle and take off, why is this?

 

[flamingDuck]

maybe your servo is set wide open

 

[Ckuhn3602]

Not it will be running fine then just all of a sudden be fully throttle and no control

 

[Greywolf74]

Sounds like a possible TX/RX issue. Make sure your TX/RX batteries are fully charged and holding charge properly. If that isnt the issue then try a different receiver or at least try setting the fail safe on your receiver so at least it doesn't run away on you when you loose control of it.

 

[Ckuhn3602]

I just ordered a new receiver and 2 new servos for the steering and throttle, hopefully this helps it

 

[Rizzle67]

Could be an air leak. Possibly retune.

 

[Rizzle67]

BTW I have had my eye on one of these. How does this thing drive? I run a 2wd nitro and 4wd seems to be a nice upgrade or change of pace. Is this a good overall rig on chassis and parts support?

 

[Ckuhn3602]

BTW I have had my eye on one of these. How does this thing drive? I run a 2wd nitro and 4wd seems to be a nice upgrade or change of pace. Is this a good overall rig on chassis and parts support?

I really have enjoyed it. I am always switching the upgrades or color. I have upgraded all to aluminum suspension now I am switching it all to rpm parts. I honestly never get bored with this truck

 

[Rizzle67]

I hear you. I feel the same with my rig only thing is its an older niro so parts are not always at LHS and online your getting raped for rarity. I financially need to move to a newer rig. I am sold. I have just needed some input. Thank you