Nitro 4-Tec Help

[iMexi]

Here's a video

Just broke in my new TRX 2.5 engine on my nitro 4-tec with the stock carb settings. But after the fourth tank, it got extremely difficult to start. Messing with the carb doesn't give good results, and when it does start, it dies as soon as i put it into mid-full throttle. Any suggestions?

 

[cbaker65]

It sounds like it needs the hell ran out of it!....
The plug could be fouled & it sounds like you need to turn your idle up some.

 

[Rooky78]

Check your idle gap. Or slide gap. Put the carb back to factory specs.

And if that's the same glow plug you broke it in with, I'd change it.

 

[mrbones]

Sounds like no fuel to carb. Put in a new plug and fill the fuel line to the carb. Leave your finger on the exhaust port while you are cranking until you see fuel filling the line all the way up.

 

[ninnon]

1) Take out glow plug and check in glow igniter outside, it should glow white.
2) Is it too cold?
3) Turn up the idle
4) pre-heat the engine.