Newbie question

[RCSean]

Hey all... I recently got back into the RC world after may years away from it and man has it changed...

So, I got a Spektrum DX3.0 remote control (came with the Truggy I got) and it seems to me that the stearing isn't as sharp as I would expect? The steering servo is a Futaba 3950 if that matters. The other thing I noticed is that when I brake the tires do not lock up, the car brakes like a real car.

Now it's a Nitro truggy and I am running it on grass so that isn't a true test I am sure, but here's my question. Are there settings on this remote that I need to adjust to allow the truggy to make tighter turns and break faster?

Thanks in advance... There are so many settings on the remote that I am lost.

 

[slowngreen]

Good chance that your steering end points need adjusted...

Heres the manual. Page 23...

http://www.modelflight.com.au/manuals/pdf/spektrum_dsm/SPMDX30ManualHR.pdf

 

[RCSean]

Thanks... The end points are set at 100, but the dual rate was 70, so maybe that was the issue with stearing... I changed that to 100 so I will test it again tomorrow and see.

Thanks for the help.