down4thakrown
RCTalk Member
- Messages
- 38
- Reaction score
- 0
- RC Driving Style
- Bashing
- Racing
the front seal on my bearing on my older picco.26 was totally gone.so i replaced it with a 697-ZZ Shielded Bearing 7x17x5 and now its leaking just as bad. did i use the wrong bearing? and when i droveit it would only run for a second or 2 and just die like the exhaust was pinched off or somthing stopped the motor suddenly. any ideas on what would cause this? the 1 way bearing carrier in the ez start was siezedtoo in the ez start housing to were it would barely let the motor start. would that cause the motor to die so suddenly?
---------- Post added at 10:58 PM ---------- Previous post was at 10:44 PM ----------
i forgot to mention that i put a new mgt 4.3 pipe and a proline runtime tank on it since i ran it last. could it be just runing to rich and the crank fillin up with fuel causeing it to die and leak so much fuel??
---------- Post added at 10:58 PM ---------- Previous post was at 10:44 PM ----------
i forgot to mention that i put a new mgt 4.3 pipe and a proline runtime tank on it since i ran it last. could it be just runing to rich and the crank fillin up with fuel causeing it to die and leak so much fuel??