Need some advice guys...again...

[Plaidfish]

what engine you plan on putting it on?? the SH??

 

[AC48]

Well actually I'm not sure. The order I placedat Ultimate Hobbies did not go through becuase or CC issues that have since been worked out, but it hasn't been bought. I was looking on ebay and found these.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5986892983&rd=1&sspagename=STRK:MEWA:IT&rd=1
This one is a RR with a P5 and a lot of cool mods.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5987130137&rd=1&sspagename=STRK:MEWA:IT&rd=1
and this one is a opend but never run Pro for $475, I am now thinking of getting one of these. If i get this one I will be putting my Collari B3 in it. If I get the one with the P5 I would sell the B3 most likely.

Which one would you guys want?

 

[PiErow]

A new one from Ultimate for 400.

 

[AC48]

Thats where I placed my origional order, and PiErow that is the RR version, not the Pro. In the second link that is a Pro brand new for 475. I am thinking about this one.

 

[AC48]

Well I bought a Pro for $475. The link is posted up there. Brand new Pro just taken out of the box. It doesn't come with the box but o well, couldn't resist for only 75 more than a RR.

I'll be running a Collari B3 with a Ofna 086 pipe unless you guys think I should get slothy's 2050. Would that get me more low end?

Steering servo will be HS-5645MG 170 or so oz/in throttle is XTM X-77 with 77 oz/in and its pretty fast like .17 or something maybe .15 sec. For now I will have stock tires. Oh and I will be running my brand new Mugen clutch set up. Should be one kick ass truggy

 

[CorradoPsi]

whats wrong with the hotbodies .26 thats in it. i have one in my savage and its powerful enough. it has more low end grunt than that B3 does. i would get the 2050 and put it on the 26, and keep your other setup in your buggy.

 

[AC48]

Well I will not have the buggy anymore. The only R/C I will have is the LSP. Would you take the .26 over the B3?

 

[PiErow]

I would keep the stock .26. I think its similar to the Mach .26. I have a Mach in my truggy and its fast as poop off the track. However on the track its lacking so i got something with just a "little" more power than the mach.

 

[CorradoPsi]

if i were you, id keep them both. the hotbodies 26, is based off of the force 26. i like the B3 better, in a buggy, but a truggy needs more torque, which the 26 has. six of one, half dozen of another. tough call.

 

[AC48]

Well I will run the B3 in it and hold on to the .26 and iif the B3 doesn't have enough I will run the .26.

Or, how about I sell them both and get a Novarossi .28 3-Port for around $200? I should be able to sell both of them and get 200 wouldn't you think? A tad more than 100 for the B3 and a tad under 100 for the .26?

 

[psunitro]

Sure you could, but I would try the 2 mills you have 1st. The .26 SHOULD be just fine for ya.. I have a Force .26(which is about the same thing as the HB .26) and it moves my truggy well. I'm using the JP-1 on it. Chris has the TOP .28 and it is a beast, but he did say the needles were touchy. I know where theres a 8 port for $200. Just ran a couple qualifiers and a main.....

 

[AC48]

I think I will try out the B3 I have and see how it goes in the LSP. If I don't like the low end power I am going to use the SH .28 I have. My friend bought one for his buggy but he won't be back for a month and its sitting here lol, if I need the low end I'll use it and buy him another with the money from the B3.

I don't think I need to go up to a Nova .28 for bashing, but I hear the .26 is a POS. I am thinking the SH will be an awesome engine if the B3 can't handle the big wheels.

 

[Plaidfish]

yeah but you won't get anywhere close to the total runtime out of anything that would be close to a rossi engine....

 

[AC48]

Wait, so your saying the SH .28 will have low run time, right?

If so you are probably right, which is why I plan on running the B3 right now. I'm just saying if its weak on the low end I would rather have the extra torque even if it means lower runtimes.

 

[RcTire]

i think your b3 will do the job...it spins all 4 tires on my buggy with ease

 

[inuse696969]

look into the gs storm unlimited truck...it needs a few ups but it seems like its would suit your situation.

 

[vbgagnon]

The SUT is old news unless you go with the SUT Se. But then your over the price of the lightning stadium. Go with what works!

 

[AC48]

I have heard bad things about it too, and I have already bought the LSP.

 

[JATO]

AC48 when you the LSP tell us how you like it compared to your buggy because I want a buggy but I like how you get the monster truck and a buggy all in one with the new truggys

 

[nath]

kyosho truggy

have you guys heard much about the kyosho inferno ST .28 ? it looks just like an inferno with slightly more clearance longer arms and larger tyres. Would it have the great inferno handling?