Motor for Scrt 10

[abs]

hi,
I have just picked up a Scrt 10. Now i would like to install a motor +esc and battery.
Can you please help with the selection.
Can i use the mamba max pro with 9000kv motor?
Any other options, please suggest.

 

[syphon68]

It really depends on what you are going to do with it, remember the higher kv the more top end and less torque. If you are going run it in the dirt then maybe try the 5700 or 4600. I know that the 9000kv sounds sexy fast but it is mainly for on road type applications and you will be lapped by people with lower kv motors just because they can put the power to the ground.

 

[abs]

which Lipo to use so that i get maximum power

 

[Metalhead Matt]

The highest discharge, mah and voltage your esc can handle. For example, a 3s(11.1 volt), 5000mah, 30c pack would be faster than a 3s, 3200mah, 20c pack. But this is only to a certain extent. It depends on how much power your esc/motor needs to perform at it's best. The lower the kv rating, the less it will tax a pack. But you can gear a bit higher because lower kv motors have more torque.

 

[symmetricon]

that motor will fry, you need a mmp with a novak HV 4.5