Lubricating & Storage..Gas Removal...

[Eddie_m63]

When do i have to use the after run oil? Today i put some drops inside engine and on the carburetor...I had to remove the glow plug and put some drops in there, was that good?
Also someone told me not to leave any gas in the engine, how can i verify if the engine is empty....

 

[BOUTCH]

You put drops of after run oil when i am not gonna use the rig for at least 4 days(thats what i do anyway, and does the work for me.)

and to make sure there is no more fuel in the mill, keep re starting the truck till it is does start anymore, it empty fuel lines and the engine.((Make sure that your tank is completely empty before doing that)

 

[Eddie_m63]

You put drops of after run oil when i am not gonna use the rig for at least 4 days(thats what i do anyway, and does the work for me.)

and to make sure there is no more fuel in the mill, keep re starting the truck till it is does start anymore, it empty fuel lines and the engine.((Make sure that your tank is completely empty before doing that)

Ok, just making sure, i wasn't screwing up mu truck.

 

[KbigO69]

So when you say put some drops in the carb do you mean take off the air filter and drop it in there? just making sure

 

[ajames942]

So when you say put some drops in the carb do you mean take off the air filter and drop it in there? just making sure

Yes, that is correct.

 

[KbigO69]

ok good. also quick question is it bad to kill your engine by running it out of fuel. sorry if i took the thread

 

[2 steppen]

ok good. also quick question is it bad to kill your engine by running it out of fuel. sorry if i took the thread

Dont worry, posting in another thread is problay better then maken one.

And no, its not bad at all, i do it all the time, or you can stick a screw driver / shoe in your flywheel?

 

[KbigO69]

well thats how i first stop it but then after i drain what fuel i can with the bottle i start it up and let it die to get the rest outa the carb

 

[ajames942]

or you can stick a screw driver / shoe in your flywheel?

:whhooo:Really?

 

[KbigO69]

really really. i usually use the end of my glow igniter( dont worry it isnt metal) i watched a how to video on killing the engine and it said this was the best way.

 

[2 steppen]

:whhooo:Really?

I'm lost, Is you being sarcastic or is you being real?
Cuase if your bring serious, then yes, I stick my shoe in the bottom of it...

 

[ajames942]

lol, i just put the bottom of my transmitter over the exhaust hole. instead of burning my finger,

 

[2 steppen]

lol, i just put the bottom of my transmitter over the exhaust hole. instead of burning my finger,

thats a pretty good idear.

 

[ajames942]

And for those wondering, It does not melt the plastic battery cover on the bottom of my transmitter.

 

[2 steppen]

And for those wondering, It does not melt the plastic battery cover on the bottom of my transmitter.

lawl i was wondrering that.
where at in pa are you? I'm in pa too.

 

[ajames942]

Elysburg

I'm lost, Is you being sarcastic or is you being real?
Cuase if your bring serious, then yes, I stick my shoe in the bottom of it...

lol I was being serious.

 

[2 steppen]

Your about 2 hours away,
If your ever in the denver / ephrata area, Let me know alittle before hand, we can met up and bash.

 

[ajames942]

Never heard of either of them, but if I am I will let you know.

 

[2 steppen]

Never heard of either of them, but if I am I will let you know.

Do you go to shomkin alot? you live close and i seen you had a blaster?

 

[ajames942]

Yep, My dad lives in Shamokin. My Blaster stays there, and i ride there. Its about 10 mins away from me.