Lsn factory setting trx 2.5

[TdoubleOG]

i posted my problems can't figure it out then i searched (shoulda done first) SORRY FOR NOT SEARCHIN lot of great info there.

only thing i couldnt find is instead of the lsn being flush how many turns out should it be

i know the hsn should be around three to four


and also how many turns out should the idle setting be


screwed with them so much now dont know wich end is up


rcnt has been a lifesaver for my RCing thanks for all the help

 

[Maxx Trooper]

the lsn is flush with the carb linkage and the idle screw, u set that when the brakes are fully applied, and u should have 1.5mm gap in the carb opening.

later

 

[Team 17]

Traxxas says the factory settings are 4 turns on the HSN and LSN should be flush with the carb body.