Lipo voltage cutoff help!

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

nitro_newbie

RCTalk Talkaholic
Messages
247
Reaction score
0
Location
Missing, Presumed dead
RC Driving Style
  1. Bashing
  2. Racing
Help i need an answer fast, what voltage should i set my esc at with the program card if it is a 4100mah 2s 7.4v lipo. should i set it at 6v?, or shoult i set it at 3.2v? What I'm not sure about is does it shut off when both sells reach 6v together, or is it when ONE sell reaches 3.2v? Anyway what should i set the cutoff at.
 
i set mine at 3.4v
 
The Cut off should read the total voltage for the pack (7.4 v in your case) when it gets to the cut off level of 3.2 that you set, it will look at the voltage and cut the motor at 6.4.

I would also set the cut off at 3.4 myself.
 
nothing less than 3v ! i dont even run my lipos tht low around 3.15 would be lowest that i can recommend

---------- Post added at 9:58 AM ---------- Previous post was at 9:57 AM ----------

thats per cell so 6.3 v and u should be ok every time
 
Back
Top