hyper 7 pcr

[hyper 7 pro]

what do you guys thing off the PCR as a racing buggy as I've just got one...

1) what are the pro`s/con`s on the pbs...
2) are there any things i can do to make it better...
3) what do you think about the hyper 8 ports with the boost...

thanks Neil

 

[kyosho138]

1) pbs is great... it will do better through the middle and the exit of a corner than a c-hub
2) radio and servos is all you need for now... a pipe would be a good idea too.. then an engine... but just get the radio and servos for now
3) i dont like the hyper 8 port if you are raceing... i would sugest RB or NovaRossi

 

[hyper 7 pro]

this is what i have

engine... hyper 21 8 port with boost,what does the boost do? better the the standard 8 port

pipe...novarossi efra-9853

servos... hitec 645mg & 625mg

 

[vbgagnon]

You'll be fine with that setup. Its a great buggy, and it runs strong. Make sure you seal the engine up real well and you won't have any problems. Those servos will work great in the buggy. I have one and its strong as hell and fast to!

 

[hyper 7 pro]

Make sure you seal the engine up real well and you won't have any problems.

why? what do i seal and why?

 

[kyosho138]

you want to seal it so you down get air leaks.all you need ot seal is the back plate and the carburator

 

[UltegraSTI]

trust me, take the time and do it. otherwise u'll feel ur tune is never right. yes the hyper can b a tedious 2 tune. as i've learned, however u will eliminate alot of the most suspect variables in doin so. let engine sit overnight after doin it.

-Ult

 

[vbgagnon]

^^^^what he said. Use RTV sealant

 

[husky24tn]

here is my hyper 7 pcr going 29feet plus...good racing buggy...what i raced last season... i also have a pro...but i just bought an xray xb8 so my hypers are gonna sell soon

 

[hyper 7 pro]

can you get a front carbon FRONT UPPER TORQUE PLATE for the pcr

 

[jon2]

Do you mean the plater right over the steering assembly? If so then yes. The PCR comes with it and the PCR metal one.

Jon

 

[hyper 7 pro]

i only got a metal one...do you know where i can get one from for the pcr...

thanks Neil...

 

[husky24tn]

www.ofna.com


part #11228 GRAPHITE FRONT & REAR SUPPORT
price 9.95

i think this is it....it will be under stock parts list somewhere if this isn't it

but any local hobby shop that carries ofna stuff can get it or scroll down here and look for your cars model

http://www2.towerhobbies.com/cgi-bi...F=HPIC3458&L=MTCC2057&S1=GRAPHITE&S2=&S3=&S4=