Hyper 7 end point adjustment HELP

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Rookie1980

RC Newbie
Messages
13
Reaction score
1
Hi everyone not long brought a second hand hyper 7 tq2 21 3 port engine all running great but my throttle/brake servo broke have replaced with new but all my epa have all gone to pot and haven’t got a clue how to set them all Any help would be appreciated ?
 

Attachments

  • 78C6861F-6CA7-4C8C-AFE3-1ABD9F33617F.jpeg
    78C6861F-6CA7-4C8C-AFE3-1ABD9F33617F.jpeg
    282.7 KB · Views: 82
  • 0D66C91A-6641-4B16-9504-85814FA143E4.jpeg
    0D66C91A-6641-4B16-9504-85814FA143E4.jpeg
    363.4 KB · Views: 61
its just adjusting. see where its at now . turn radio gear on and adjust to limits needed
 
disconnect the linkages, turn the system on and center the servo. Then make the adjustments to allow for full throttle and full braking in the other direction.
 
If your radio has EPA, then follow the instructions, if not, then it is servo to servo, their degree of turn are different, you may have to use the inner hole of your servo arms and adjust the linkages.
 

Similar threads

H
Replies
2
Views
716
hamedhbb
H
D
Replies
25
Views
3K
Deku
D
Replies
9
Views
679
danielhornet1
D
D
Replies
7
Views
2K
Daltonator777
D
Back
Top