hsp problems help

[spunkbubble]

I've got a hsp backwash pro just running in and wheels keep falling off could be simple fix I don't know if over tighting them or not and it keeps boging down under load cheers Jason ps new to this

 

[Greywolf74]

Use blue threadlock on your wheel nuts and they wont come off. If its bogging down its usually a sign of your tune being to rich.

Since you're new Id start off reading about tuning, idle gap, detecting and sealing airleaks in your engine, and various other info found HERE.

There are 2 different tuning guides in that thread I prefer Robin's which is all the way at the bottom. HERE is the direct link to his post.

 

[spunkbubble]

Think I've got running rite just can't tell if blue smoke as there will be a lot of steam for being cold I've tryed lock tight only happens on left hand rear and right hand front wheels also where is best place to get rite parts need the hex on inside of wheel and the little metal pins that lock the the shafts to the wheels

 

[Greywolf74]

Couldnt tell yeah on HSP replacement parts. Id look to see if they have a website or if you can find parts for it on ebay. probably the only 2 places your going to find parts for an off brand RC.

 

[spunkbubble]

Managed to get parts on eBay easy enough no shops in my area deal we hsp I take it it's not a good brand ??

 

[Sibbers]

Electrics problem with HSP Backwash

--------------------------------------------------------------------------------

I recently dismantled my race car in order to clean it but during the processs we manged to break two wires that were soldered to the on/off switch.

There appears to be three terminals but only two wires and I don't know what the combination is. I have also lost the notes we made telling us which cable fits on to each of the 12 metal pins on the small rectangular box that the the aerial is mounted on.

Does anyone have one of these cars and if so could you photograph all the electrical wires going from the battery pack and into the aerial box so i can be sure which way round they go. Or does anyone have a wiring diagram that can explain which wires go where ??


Many thanks

Sibbers
London. UK

 

[Greywolf74]

HSP, is a cheap offbrand...Id recommend upgrading to something from a high quality company. Id look into an OFNA Ultra LX2 or Hyper 7 once your ready to upgrade abit.

 

[RDG251275]

Are all the parts of OFNA or Hyper 7 will be compatible with HSP?
I want to upgrade my HSP Camper dogbone...pls advise........

HSP, is a cheap offbrand...Id recommend upgrading to something from a high quality company. Id look into an OFNA Ultra LX2 or Hyper 7 once your ready to upgrade abit.

 

[hamz9561]

Probably not compatible. Those upgrades are for the vehicle not the individual parts.

 

[RDG251275]

Any idea to get substitution of Camper Dogbone?
Mine always broken especially rear dogbone...