Hpi trophy drivshaft problem

[hpi con]

Heloo i have installed big bore shocks all round on my hpi trophy buggy, but when i do big jumps the drivshaft pops out, no1 that i know, knows how to sort it out, so will someone please help me,
thanks
connor

 

[scottc]

conner the first thing i thought is are the shocks the right ones for your buggy, mabey there to long and that makes the drive shaft pop out.

 

[hpi con]

Well I fort that mayb the problem, but I got the part number off hpi's website, I know there is 2 types for the front but I got the ones hpi list in optional extras, it pops out when the shock Is fully collapsed? It fixes it if I move the shock for less travel and tighten the spring down more but then got hardly any give in the shocks

 

[charliejp]

You can put a piece of fuel line on the shaft at the bottom of the shock to keep the shocks from fully collapsing. It's not a bad idea to do it anyways. Just make sure to make them the same.

 

[hpi con]

You can put a piece of fuel line on the shaft at the bottom of the shock to keep the shocks from fully collapsing. It's not a bad idea to do it anyways. Just make sure to make them the same.

Umm I didn't think of that I will try that and see how I get on, thank u