help!

[tlr241293]

does any one know why my pull starts are always snapping and does anyone know were i can find a electric start

thanks

 

[samrsnow]

What rc do you have and what engine is in it? You are most likely pulling it way too far out and thus making the string snap. You could get a roto start system but it depends on what engine you have.

 

[Metalhead Matt]

It's either that or your tunes way off and it's flooding. What vehicle do you have?

 

[Crunkvilletx]

If it's super hard to pull don't even try because it's flooded. It's shouldn't be to hard unless your breaking in the engine.

 

[mctint]

If its hard its like they say it must be flooded. If not try checking the tiny steel ring on the outside hole of the pull start where the rope comes out, check to see if theres any odd edge or burr, i had this problem and it just kept slicing the rope till it eventually broke took me about 5 ropes b4 i found out!!!!