help me out

[nodsterr]

I have a tmaxx 3.3 and i am going to be taking out the carb and replacing the carb body due to a stripped out body were the high speed adjustment is...........................Now is there anything i should be aware of when taking this apart or back together that i might need to know????

THANKS

 

[Rolex]

When you put it back in, press down hard on the carb throat to compress and seal the 0-ring as you tighten the clamp. NOT seating that 0-ring properly is a prime cause of air leaks.

 

[nodsterr]

When you put it back in, press down hard on the carb throat to compress and seal the 0-ring as you tighten the clamp. NOT seating that 0-ring properly is a prime cause of air leaks.

Do you know the factory setting for the high speed, low speed, idle?