Furitek now has power systems for Arrma Grom series.

[Doom!]

Looking for an upgrade for your Grom, here you go.

 

[WickedFog]

Looking for an upgrade for your Grom, here you go.

Sweet! This is going to be a hot item I bet.

 

[tntpoof]

1/18 and 1/12 scale electronics and nice servo mount..I wont need a crawler type motor but that esc looks like it could handle to strain of a larger kv motors
3 amp bec .probably will need some help from a ubec.(dont forget to remove center wire from futaba plug from esc to rx

 

[luke66]

Hum. That's pretty nice. but 100$ is almost Micro X2.

 

[TeknoJ]

The grom lineup doesn’t seem like it’s an affordable car any more!

 

[Doom!]

Just an option for those that can't let well enough alone. all of my Grom's are running stock power systems. If I wanted to go brushless the Furitek would be my first choice. I have too many other projects at the moment that need attention.

 

[Greywolf74]

Hum. That's pretty nice. but 100$ is almost Micro X2.

I'd put that Furitek ESC up against the Castle ESC any day of the week.

 

[luke66]

So you're saying the Furitek is as good? Can it run 4S as well?

 

[Doom!]

Why would you need 4S on a Grom, I think that would be overkill.

 

[Greywolf74]

So you're saying the Furitek is as good? Can it run 4S as well?

I was speaking in terms of quality, not specs. I wasn't trying to say that the Paso had the same specs as a mamba micro x2. Besides, 4S is way too much for a Grom.

 

[DavidB1126]

Why would you need 4S on a Grom, I think that would be overkill.

You know luke has the need for speed and power...

 

[Doom!]

You know luke has the need for speed and power...

Doesn't do any good if the car disintegrates.

 

[Hammer Down]

3s is almost too much! Notice I said “almost”

 

[Glitch]

I would think a bigger 28xx can would be better...
?

 

[luke66]

I was speaking in terms of quality, not specs. I wasn't trying to say that the Paso had the same specs as a mamba micro x2. Besides, 4S is way too much for a Grom.

So it's gonna run smoother? Or just gonna last longer and be nicer?

I just wanna know. Genuinely curious.

 

[Slick2500]

5600kv? That's too high imho unless you only plan to run 2s. 3s that little motor is gonna be spinning at 70,560 rpms.

 

[Greywolf74]

So it's gonna run smoother? Or just gonna last longer and be nicer?

I just wanna know. Genuinely curious.

I can't say for certain, as I've never owned a micro x2, but its going to be in the same class.

 

[Zerksies]

The grom lineup doesn’t seem like it’s an affordable car any more!

Not at all. I have $200 into a $150 RC

 

[Slick2500]

Not at all. I have $200 into a $150 RC

Gotta love 1/18 scale cars. It's so easy to just toss $300 at them without batting an eye.

 

[Hammer Down]

Better than $1500 in a $500 car…