FlySky Adapter

[SpeedRacer5873]

Hi,
Recently for my birthday i got a Dumbo rc x6a and a fs sm100. i watched a tutorial video and it showed me how to go into the setup usb controller setting etc and i clicked calibrate but it wasn't picking up the signals when i turned steering and accelerator, any help would be appreciated.

Thanks!

 

[tntpoof]

do you have sm 100 driver installed on comp?

 

[SpeedRacer5873]

no i dont have the file

 

[nino]

Try the Tx/Rx in a car, see if it works. Maybe you just need to bind them.

 

[SpeedRacer5873]

Does anyone have driver download/name?

 

[tntpoof]

the packaging should have had a link printed at bottom..the link is at the bottom in this vid but I cannot read it. its in vid just before he shows his plane

https://www.bing.com/videos/rivervi...A2B316632730094A73A9A2B316632730094&FORM=VIRE

https://www.reddit.com/r/fpv/comments/l3ng01/flysky_simulator_dongle_driver

https://www.reddit.com/r/fpv/comments/l3ng01/flysky_simulator_dongle_driver

 

[SpeedRacer5873]

it says "This cable doesn’t require any drivers, setup is simple"

 

[SpeedRacer5873]

Its as if it isn't actually getting the signals, because it shows up in devices and printers as ppm controller and vrc pro detects it and i can select it but when i use the trigger or steering it does nothing, and that's also why i can't calibrate it

 

[nino]

Yes, that's why I asked you if the Rx is bound to the Tx. Answering instead of writing 5 new posts would help.

 

[tntpoof]

the dongle needs a driver. download the driver. and try reading instructions on new products.why are you so obstinate?

download the driver then comp off then back on and see.

 

[SpeedRacer5873]

I binded the TX and RX but it still wasn't recognizing the signal. and i still can't find the driver

 

[tntpoof]

here,,detective has it here just click on his post with DRIVER
https://superccomputerrepair.com/2015-drivers-library-f7/fs-sm100-driver-t483844.html

or right at top

https://alldrivers4devices.net/download.php?key=super&driver=fs-sm100

 

[tntpoof]

well ?

 

[SpeedRacer5873]

Nothing, i tried but i reckon it might just be a faulty cable i saw some other forums and posts and a lot of people have had it were they buy one and it doesn't work then they get another and its perfectly fine, so I've contacted the guy we got it from, and we are sorting something out.

 

[nino]

Try reversing the channels. Mine (a cheap aliexpress version) wouldn't work until i reversed the channels.

 

[SpeedRacer5873]

How do you do that? do you mean on the RX or the Adapter

 

[nino]

On the transmitter

 

[tntpoof]

he means from either forward to reverse or vise versa..

 

[SpeedRacer5873]

i flicked the two switches on the top, that said nor to rev still didn't work. I'm also curious what the button 1, 2 and 3 are and if they are important, when i click calibrate, and get to the menu where you push the controls to max and min it doesn't pick anything up. although it shows up in devices and printers as well as the first calibration screen.

 

[tntpoof]

when you switch direction you will need to recalibrate..