Engine tuning problems

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

New2nitro147

RC Newbie
Messages
3
Reaction score
0
So i recently perchased the losi 8ight t rtr truggy, and have finished the break in procedure. I started tuning it and have almost gotten it perfect, the only problem is when I pull the trigger to accelerate there is a lot of lag and what sounds like the engine bogging down. I do live in Colorado springs so tuning is going to be difficult but any suggestions on what to do? I'm kind of puzzled and dont want to set my engine so lean that ill ruin it.
 
Last edited:
I would say you are too rich on the LSN, especially if it was a brad new engine. Try to lean it 1/8 of a turn and see what happens.
 
Th
I would say you are too rich on the LSN, especially if it was a brad new engine. Try to lean it 1/8 of a turn and see what happens.
Thanks ill give it a try
 
Back
Top