Digital Servo

[Bkyd Basher]

Hey guys, whats the deal with the digital servo, They are for the 2.4ghz setup? Can u use a standard 2055 with the 2.4 ghz setup?

 

[Grave]

Digital servo's work & perform alot better than a standard servo will. Most ALL Servo's will work with a 2.4 Gig system & alot of the better servo's 1 name "SAVOX".
Is a really good servo to get & alittle expensive for a RIG I have a SAVOX servo "for steering" in my T-MAXX & alot of servos require alittle more power to run them most guy's run a RX recever hump pack Mah's 1200 - 1800. I run a team orion 1600Mah hump RX pack for my SAVOX. & Standard servo's are pretty much THAT STANDARD & droped into most RTR Rig's & upgraded from there..

 

[Greywolf74]

If youd like to learn the differences between digital and analog servos you can check out my youtube RC channel. I have a video on that topic.

[ame="http://www.youtube.com/watch?v=jpPOOEBBK44"]Differences between digital and analog servos - YouTube[/ame]

 

[Bkyd Basher]

Ok thanks. So u can use a non digital servo,like the traxxas 2070 in anything and a digital servo like the 2075 in anything regaurdless of what rx and tx setup u use right?

 

[hamz9561]

Correct. You only have to worry about going past the end points on the Digital servos. As long as you don't go past the endpoints you will be fine.