Differential

[MTSnowKing]

hey, i was wondering what how the gears inside the back differential go together. If you guys could show pictures or anything that would be awesome! thanks

 

[hipluther01]

hey, i was wondering what how the gears inside the back differential go together. If you guys could show pictures or anything that would be awesome! thanks

I dnt have any pics, but there isnt much to it. The carrier hub (black shell connected to the ring gear) will have one pinion going through the back side where the hole and bearing is. Next is the spider gears. These are 2 small gears that have a shaft running through them. Install them inside the carrier hub facing each other with the shaft running though them. Next you will attach the ring gear (the big one) to the carrier hub with the 4 small screws. Then place your last 2 remaining pinion gears on the 2 open areas left through the differential case. I hope that helped

 

[MTSnowKing]

ok thanks alot!

 

[Tmaxx96]

ill snap a few pics i have an old diff taken apart down stairs give me a few

 

[Tmaxx96]

ok here are the picks

and make sure when you put the diff back in the truck its turned the right way

hope these help

 

[OldSkool]

http://www.traxxas.com/PDF-Library/4908_front.pdf
look in the upper right corner

 

[MTSnowKing]

OK Thank, this helped alot

 

[MaxMudSlinger]

I know mine goes tic tic tic in my emaxx otherwise I hope they are easy to rebuild cause I got one that needs it

 

[frickenjoey]

Internal picture of the gears courtesy of Traxxas