Could this be converted to hobby grade?

[pug]

It’s pretty slow, has brushed motors, and runs on an 8 cell nicd.

 

[tntpoof]

possible .. 3 cell lipo...with all your skills should be easy 4 u

 

[pug]

possible .. 3 cell lipo...with all your skills should be easy 4 u

What esc and transmitter could I use that constantly runs one motor, but the other two on different channels?

 

[Greywolf74]

You would need a radio that is at least 3 channel and has channel mixing capabilities.

 

[WVNed]

You need an air radio with a throttle channel and elvon mixing

Throttle would be lift. Up is go faster, down slower and left/right thrust differential.
Elvon mixing takes two channels and allows them to move together or move in opposite directions

 

[tntpoof]

id go w a dual stick with a 3rd channel I could turn on/off..then 2 esc

 

[Monster Slash]

Probably would be just better off getting another hobby car. Anything that i converted to hobby grade keeps breaking. RIP

 

[pug]

Probably would be just better off getting another hobby car. Anything that i converted to hobby grade keeps breaking. RIP

It’s a hovercraft not a car, lol. Also, it fills the skirt with air and it acts like a bumper.

 

[tntpoof]

it would be a fun conversion...maybe a million utube hits

 

[pug]

it would be a fun conversion...maybe a million utube hits

Maybe… It will be very interesting to do, I just can’t figure out how to disassemble it though!

 

[tntpoof]

check under the skirt

 

[pug]

check under the skirt

I removed the screws, but the skirt is connected to the base, I don’t want to damage the skirt.

that’s the under side, I put the screws back in though.