compressor

[wannarunem]

I know you can't sell it...but i still want to buy it!!! I may pick up the F-650 body Sunday..do you have an air brush yet???? I think thats the biggest made. I've got to have a body that will clear the LST shocks and ext TVP's. Id rather have a Silverado but dont think theres one that will fit...or is there?

 

[robmob]

Do i need a booth??? I dont know where i am going to paint... I dont think the parents would like me painting anywhere, although my dad thinks its a good idea... I will talk to them about a spot, and see if i can't get something going.

You don't need a booth. I airbrush right on my workbench. Just don't use more pressure than you need and you wont get a lot of blow back or overspray. My workbench is in my garage and I don't even bother to pull the cars out when I airbrush.

 

[pmanro]

I use an in-line moisture trap and one at the compressor (probably overkill, but if you start spitting any water it gets ugly quick).

That compressor should work fine and you should have a pressure regulator as you will need to spray different paints as different psi. I spray createx/faskolor at 35-45 psi and Spaz Stix at about 10-15 psi.

Here's my setup:

Phil

http://www.wickedairbrush.com

 

[RushRC]

Damn nice setup! is that a Paint Hood/ Booth you have there??

 

[Pinblaster]

this is what you need for water trap filter and regulator http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=42035

I have one of these with quick connectors on both sides so I can keep the compressor at full pressure and adjust the air pressure at the filter/regulator when painting and don't have to change the pressure on the compressor all of the time.