Check back often for items to be added. Prices include shipping.
1 set of NIP Proline Paddles made for 1/8 scale buggies. 1 set of new out of package Advantage Racing wheels and Ofna medium molded foam inserts. $30 for the tires, wheels and foams sold
Futaba MC230CR ESC. Great upgrade over stock mini ESCs. RX wire has been shortened and crimped for a very tidy chassis. I also installed a micro switch instead of the bulky stock on/off switch. Vendetta stock 380 motor is soldered to ESC, and will be included. $sold
http://laurale.smugmug.com/photos/169027701-L.jpg
1 Maxamps 1100mah lipo pack. A perfect fit in the Vendetta buggy. All packs have less than 10 charges and are balanced. $18 1 left.
Stock Duratrax ESC, battery, and charger from Vendetta buggy. All new and never been used. $25 for all three
Quark 80B Competition Brushless ESC-This is the model that won the 2006 Tamiya 3 hour Enduro-specs here http://www.quarkbrushless.com/pro_carcontrol_80b.htm
This ESC was purchased as NIB but when it came it had connectors soldered on. I didn't like the soldering job so I cut the connectors off. I will include a NIP set of 4mm gold bullet connectors and new pair of Deans Ultra connectors to get you started. If you want them soldered on just let me know. Great for use in cars or boats. $sold
Pair of Maxamps 4000mah 4S lipo packs-These packs are rated at 15C continuous (60 AMPS) and 20C burst (80 AMPS). Each pack has 20 cycles on them. Balanced and perfect working condition. Only cosmetic blemish is heat shrink slightly melted on one side. I trust these packs to keep but they are not getting any use right now. I will include a 4S balancing harness for use with Hyperion LBA10 balancer if both packs are purchased together. SOLD
Maxamps 6000mah 5S lipo pack-This pack was custom built (before they were available as reg order) with their HV High Voltage Copper Tab cells. This pack is rated at 20C continuous (120 AMPS) and 50C burst (300 AMPS). I have four 50% cycles on this pack. Balanced, looks, and performs as new. I will include a 5S balancing harness for use with Hyperion LBA10 balancer. $200
Used HPI Savage 2 speed tranny. $15
Panther Komodo Dragon tires mounted on yellow Mugen wheels with Ofna medium molded foams-glue job is not great looking since I suck at gluing tires. I ran these for one tank at the West Coast Bash last year. SOLD
Nitro Essentials Tool package-whether you race or bash, you'll be using one of these tools more than once. The right tool for the right job makes wrenching easier and more enjoyable. SOLD
RMV Flywheel Removal Tool
Ofna Flywheel wrench-I'll include a long neck 10mm 6 point socket, perfect for clutch nut installation
Sportwerks clutch spring installation/removal tool
Dynamite Red Handle Glow Plug Wrench (Sorry I thought it was Dubro, looks exactly the same though)
Racer's Edge Aluminum glow plug caddy, holds 8 plugs
3 glow plug ignitors and I will also include a charge adapter with banana plugs. Let me know if your charger uses different plugs and I'll solder a different plug on for you.
1)Great Planes ignitor with GP 3700mah cell-spring locking type and lasts a VERY LONG time with the GP cell
2)Tower Hobbies pocket ignitor-twist lock type, uses a replaceable AA battery and great as a backup
3)Thunder Tiger ignitor-just throwing this one in there as a freebie, someone gave this too me and I don't know much about it other than it works
Dubro Body Reamer
Roto start wand-don't need it so if you want it I'll just include it in the package
2 Spektrum SR3000 receivers. These are in like new condition SOLD
Canon Powershot A430 digital camera. 4MP with Lowepro case. Uses SD card. Original box, manuals, cable, and software included. Review here http://www.steves-digicams.com/2006_reviews/a430.html SOLD
More pics coming soon.
1 set of NIP Proline Paddles made for 1/8 scale buggies. 1 set of new out of package Advantage Racing wheels and Ofna medium molded foam inserts. $30 for the tires, wheels and foams sold
Futaba MC230CR ESC. Great upgrade over stock mini ESCs. RX wire has been shortened and crimped for a very tidy chassis. I also installed a micro switch instead of the bulky stock on/off switch. Vendetta stock 380 motor is soldered to ESC, and will be included. $sold
http://laurale.smugmug.com/photos/169027701-L.jpg
1 Maxamps 1100mah lipo pack. A perfect fit in the Vendetta buggy. All packs have less than 10 charges and are balanced. $18 1 left.
Stock Duratrax ESC, battery, and charger from Vendetta buggy. All new and never been used. $25 for all three
Quark 80B Competition Brushless ESC-This is the model that won the 2006 Tamiya 3 hour Enduro-specs here http://www.quarkbrushless.com/pro_carcontrol_80b.htm
This ESC was purchased as NIB but when it came it had connectors soldered on. I didn't like the soldering job so I cut the connectors off. I will include a NIP set of 4mm gold bullet connectors and new pair of Deans Ultra connectors to get you started. If you want them soldered on just let me know. Great for use in cars or boats. $sold
Pair of Maxamps 4000mah 4S lipo packs-These packs are rated at 15C continuous (60 AMPS) and 20C burst (80 AMPS). Each pack has 20 cycles on them. Balanced and perfect working condition. Only cosmetic blemish is heat shrink slightly melted on one side. I trust these packs to keep but they are not getting any use right now. I will include a 4S balancing harness for use with Hyperion LBA10 balancer if both packs are purchased together. SOLD
Maxamps 6000mah 5S lipo pack-This pack was custom built (before they were available as reg order) with their HV High Voltage Copper Tab cells. This pack is rated at 20C continuous (120 AMPS) and 50C burst (300 AMPS). I have four 50% cycles on this pack. Balanced, looks, and performs as new. I will include a 5S balancing harness for use with Hyperion LBA10 balancer. $200
Used HPI Savage 2 speed tranny. $15
Panther Komodo Dragon tires mounted on yellow Mugen wheels with Ofna medium molded foams-glue job is not great looking since I suck at gluing tires. I ran these for one tank at the West Coast Bash last year. SOLD
Nitro Essentials Tool package-whether you race or bash, you'll be using one of these tools more than once. The right tool for the right job makes wrenching easier and more enjoyable. SOLD
RMV Flywheel Removal Tool
Ofna Flywheel wrench-I'll include a long neck 10mm 6 point socket, perfect for clutch nut installation
Sportwerks clutch spring installation/removal tool
Dynamite Red Handle Glow Plug Wrench (Sorry I thought it was Dubro, looks exactly the same though)
Racer's Edge Aluminum glow plug caddy, holds 8 plugs
3 glow plug ignitors and I will also include a charge adapter with banana plugs. Let me know if your charger uses different plugs and I'll solder a different plug on for you.
1)Great Planes ignitor with GP 3700mah cell-spring locking type and lasts a VERY LONG time with the GP cell
2)Tower Hobbies pocket ignitor-twist lock type, uses a replaceable AA battery and great as a backup
3)Thunder Tiger ignitor-just throwing this one in there as a freebie, someone gave this too me and I don't know much about it other than it works
Dubro Body Reamer
Roto start wand-don't need it so if you want it I'll just include it in the package
2 Spektrum SR3000 receivers. These are in like new condition SOLD
Canon Powershot A430 digital camera. 4MP with Lowepro case. Uses SD card. Original box, manuals, cable, and software included. Review here http://www.steves-digicams.com/2006_reviews/a430.html SOLD
More pics coming soon.
Attachments
Last edited:
