Sold / Found Checkpoint TC-1030 Charger F/S

[robmob]

I have a Team Checkpoint TC-1030 For Sale.

Perfect working condition. Used but not abused at all.

Comes with everything you see in the pics.

SOLD

PayPal only.

FEATURES: Charges 1-10 cell NiCd and NiMH cells (1.2-12.0V) and
1-4 LiPo or Li-Ion cells (3.6-14.8V)
Five charge methods: Linear, Reflex, Pulse, 3-step and 4-step with a
top-off function that fully charges NiMHs without over heating
0.1-10.0A Linear Discharge Current and custom pulsed 20A and 30A
Discharge currents for top level pack conditioning, Dead-Short
mode for careful deep discharging
0-25mV peak sensitivity for NiCd and NiMHs including 1mV and 2mV
options
Thermal cutoff (requires optional Pro Temperature Sensor, TCPP9101)
Three motor break-in modes; single step, four step and motor test
mode, voltage adjustable from 1.0-8.0V timer adjustable from
1-180 minutes, can also be used for comm lathes and tire warmers
Blue LCD backlight for easy viewing in almost any light condition
Two cooling fans

SPECS: Dimensions: 5.5 x 1.8 x 5.9" (140 x 46 x 150mm)
Weight: 24.5oz (695g)
Input Voltage: 11-15V DC
Battery Types: 1-10 cell NiCd and NiMH cells (1.2-12.0V) and
1-4 LiPo or Li-Ion cells (3.6-14.8V)
Fast Charge Current: 0.1-10.0A
Fast Charge Methods: Linear, Reflex, Pulse, 3-step and 4-step
Fast Charge Termination: Peak Detection for NiCd and NiMH,
Constant Current/Constant Voltage (CC/CV) for LiPo/Ion
Peak Sensitivity: 0-25mV adjustable (including 1mV, 2mV)
Trickle Charge Current: 0-500mA (NiCd/NiMH only)
Top-off Charge: 0-1000mA (NiMH only)
Max Discharge Power: 90 watts
Discharge Current: 0.1-10.0A Linear Discharge Current
Custom pulsed 20A and 30A w/dead short mode
Discharge Cutoff Voltage: 0.1-1.1V per cell (NiCd and NiMH)
2.5-3.7V per cell (LiPo/Ion)
Temperature Cut-off Range: 50-132°F (10-55°C)
Cycle Count: 1-10 cycles (NiCd/NiMH only)
Battery Memories: 10
Display Type: 8x21 graphing LCD w/Blue backlight
Motor Break-In: Single step, four step and motor test, voltage
adjustable from 1.0-8.0V, timer adjustable from 1-180 minutes
maintains 20A @ 1.5V

 

[revo_rob_1984]

Is it ready to charge as soon as it comes out of the box or is there something else that it needs?. . .power supply? anything?

 

[robmob]

You would need a power supply or a 12V battery.

 

[RC Addict]

Ummmm... Sorry to go off-topic but this bet thing just went WAYYYY too far...

 

[savon]

Ummmm... Sorry to go off-topic but this bet thing just went WAYYYY too far...

+1, it's kinda weird :shrug:

 

[frickenjoey]

That is a nice charger... the next step up from my Duratrax ICE. By the way my 6 yo daughter likes your new signature block. She loves My Little Ponies too!

 

[MotoGod]

The Checkpoint is pretty much a re-badged ICE Joey ;-)

 

[robmob]

The Checkpoint is pretty much a re-badged ICE Joey ;-)

It has more features than the ICE.

 

[revo_rob_1984]

You would need a power supply or a 12V battery.

approx how much is a power supply gonna cost?

 

[robmob]

That depends on where you buy it from. Probably anywhere from $40 - $80.

Personally I would get at least a 20amp supply, but you can get away with a 10amp.

A power supply from a desktop computer will work as well.

 

[revo_rob_1984]

ok thanks for the info, i'll let you know

 

[frickenjoey]

It has more features than the ICE.

You are correct sir....just a few extra things.....not much really.