Brake / Throttle Servo

[Doberman]

My buddies (Jato 2.5) Brake / Throttle Servo broke at the 2 holes that are used to bolt it down.

Just wanted to know if there is a better (than stock) servo it could be replaced with?????

It would be my guess that since it is plastic and broke, that if he replaces with a stock servo it will just break again.....

Any input is appreciated.
Thanks!
-D

 

[olds97_lss]

I don't know of a servo that has non-plastic mounting ears.

A 625MG would be a good replacement. Faster and more torque than stock.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXUZ87&P=ML

FFRC makes some little aluminum bars to help spread the pressure of the mounting screws for servos: http://www.fullforcerc.com/electronics2.htm

 

[Doberman]

I don't know of a servo that has non-plastic mounting ears.

A 625MG would be a good replacement. Faster and more torque than stock.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXUZ87&P=ML

FFRC makes some little aluminum bars to help spread the pressure of the mounting screws for servos: http://www.fullforcerc.com/electronics2.htm

Thanks for the quick reply! I just emailed the info to him.
-D