Basic needle settings for

[zmaxx22]

Tamiya Nitrage .32 motor big block

which glow plug works same motor

 

[chaos2767]

Needle settings are going to vary in different types of climates so it is hard to recommend something.

 

[Nitro4910]

For a stock get it started needle settings Tamiya recommends 4 turns out on the HSN, and 1/2 turn blow the rim on the LSN, & a 1mm idle gap.

From there your gonna have to tune for your area & the time of year.
Once it gets colder your gonna have to richen the tune to make up for the cold denser air.

All of this is found on page #25 of the manual.
Download a copy for yourself for easy reference.
http://www.tamiyausa.com/pdf/manuals/43532ml.pdf


For plugs, O'Donnells are good.
http://www.amain.com/product_info.p...l-Medium-Purple-Sport-Glow-Plug-25-30-Nitro-1
McCoy are good too.
http://www.amain.com/product_info.p...2119/n/Racers-Edge-McCoy-8-Medium-Glow-Plug-1