• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

axial scx24 body lift

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
It raises the cg, it will cause it to tip over easily, I don’t recommend it. What SCX24 do you own?
 
I don’t think you will need to raise the body, the Jeep has some pretty good tire clearance compared to the c10. The stock tires are pretty large and most upgraded tires are smaller than stock on the Jeep. I recommend putting brass diff covers and wheel weights on if you haven’t already, this will allow you to lower the cg and raise the body to whatever height you want.
 
I don’t think you will need to raise the body, the Jeep has some pretty good tire clearance compared to the c10. The stock tires are pretty large and most upgraded tires are smaller than stock on the Jeep. I recommend putting brass diff covers and wheel weights on if you haven’t already, this will allow you to lower the cg and raise the body to whatever height you want.
👍
The stock Jeep crawls fairly well as is. The tires are already oversized. A simple start to improve the performance is adding brass wheel weights.
To really improve crawling performance you want to upgrade tires. Those stock tires are just ok, since they are not as soft a compound.
 
👆👆
This! I heard that RC4wd makes good tires.
 
Back
Top