Are my only options SPECIFIC Kyosho engines??

[Hairy W Bush]

I have a Kyosho FAZER without the engine and the chassis has the 2 slots and the hole at the front; 3 hole pattern. Most engines just have the 2 holes on the side, opposite of the way my chassis has its slots.

So, those bosses are resting on the chassis. Is this configuration the only thing I can get?

 

[WickedFog]

You could always cut your own slots.

 

[tudordewolf]

I have a Kyosho FAZER without the engine and the chassis has the 2 slots and the hole at the front; 3 hole pattern. Most engines just have the 2 holes on the side, opposite of the way my chassis has its slots.

So, those bosses are resting on the chassis. Is this configuration the only thing I can get?

I don't know of any engine mounts that adapt the tricycle pattern to 4-hole, you may have to find a match or improvise.

At least I can point you in the direction of a suitable engine, the GZ-15, here. I've bought engines from that vendor before, they've got some choice NOS.

 

[WickedFog]

@cbaker65 has experience with Kyosho and tons of other nitro stuff. He may have some ideas for you.

 

[fstnd]

I think you can use any engine but with the engine mounts then of course, and drill your own 4 holes in the chassis(which could be a great challenge though)

 

[Hairy W Bush]

I don't know of any engine mounts that adapt the tricycle pattern to 4-hole, you may have to find a match or improvise.

At least I can point you in the direction of a suitable engine, the GXR-15, here. I've bought engines from that vendor before, they've got some choice NOS.

That is pricy! Looks identical to the GZ-15. Thanks

 

[tudordewolf]

That is pricy! Looks identical to the GZ-15. Thanks

I think you're right and they just mixed up the names, the GXR is the one in your original post.

 

[TMAXX]

That is pricy! Looks identical to the GZ-15. Thanks

I think thats in Yuan its not that much.