- Messages
- 6,057
- Reaction score
- 10,045
- Location
- Baltimore
- RC Driving Style
- Bashing
- Racing
- Crawling
- Scale Builder
Installed the new savox servo in the mini b. Moved the servo up further by using longer screws and nuts. Have the same problem still. I don't get full left or right. I messed with everything in my radio with end points and steering trim. I am using a servo horn thingy that came with the kit since the stock losi one did not fit. I also tried to get that servo horn mostly center to the best I could. I had loosen some of the bell crank and steering rack screws to see if that made a difference and it didn't. I am running out of ideas. Any other thoughts guys? Don't get me wrong micro and mini rcs are fun but a pain to work on since how small the parts are. My thought is it is the servo horn. Might buy a custom printed one or have someone print one for me.
Maybe this would work: https://www.ebay.com/itm/3342140685...SrZxy0JMg4Nx/A7ewqxCmiLf1A==|tkp:BFBMiIrT26Nh
This is servo mount and horn. This is for the sh 0265 and 0264 mg but should work with the sh0255.
Maybe this would work: https://www.ebay.com/itm/3342140685...SrZxy0JMg4Nx/A7ewqxCmiLf1A==|tkp:BFBMiIrT26Nh
This is servo mount and horn. This is for the sh 0265 and 0264 mg but should work with the sh0255.
Last edited: