3rd ch question

[saddlehorse]

Since doing away with the reverse on my revo is there a way I could wire the trigger for it to turn lights off and on?

 

[Greywolf74]

If your light will run from the RX you can.

 

[saddlehorse]

I was thinking of plugin lights in where the reverse deal plugs in.

---------- Post added at 2:58 PM ---------- Previous post was at 2:57 PM ----------

Next question, will the rx pack run led lights?
I know on my old crawler it wouldn't run the lights and truck.

 

[Greywolf74]

right...if your lights will run off of the same voltage your RX puts out (general 6V) then yes you can do that.

 

[Nitro4910]

Just use a Receiver Controlled Switch & an extra battery to power just the lights.
http://www.ebay.com/itm/RC-RECEIVER...racter_Radio_Control_Toys&hash=item51a3abb35a

 

[saddlehorse]

That works. Thanks

 

[Greywolf74]

Just use a Receiver Controlled Switch & an extra battery to power just the lights.
http://www.ebay.com/itm/RC-RECEIVER-ON-OFF-CONTROL-CONTROLLED-SWITCH-TURNIGY-USA-LIGHTS-RETRACTS-ETC-/350638289754?pt=US_Character_Radio_Control_Toys&hash=item51a3abb35a

Cool! Didnt know they made those!

 

[saddlehorse]

Me either, that is a good idea

 

[frickenjoey]

Yes it is just a pico switch. It is much the same thing we used to mod to make the kill switch on gassers like the Baja. It is just wired to be normally open with power or normally closed w/power. This is a about $5 cheaper then the one from Dimension Engineering