94stanggt
RCTalk Racer
Alright heres my set up as of now. i have a 2.5r with a 3.3 engine and its mostly stock except RPM arms (front+back) w/ tru-track, RPM shock towers, RPM front and rear bumpers, and ya some better servos. Christmas was good to me.
First I am looking at getting a 3.3 tranny off ebay. Is there a difference between the 4908 and the 4909 3.3 tranny? I'm guessing they are both the same, though not too sure. On ebay though it looks like it is mostly 4908's getting parted out.
Also I have my 2.5 clutch bell on my 3.3 engine. Will that work for the new tranny cause the 2.5 spur has 72 teeth while the 3.3 has 52 teeth or do i need to get a new clutch bell with a different pitch and # of teeth to work with the 3.3 tranny?
Second part is that I also want to upgrade my drive shafts to cvd's. I can tell that my 2-3 year old stock shafts are getting stressed and worn out and will die most likely some time soon with the bigger engine so might as well do it all in one go i figure. I want to at least do the center shafts for now but i still want to know what people have used and tested for shafts going from the diffs to the wheels for future reference. (Trying not to go broke while out at school ) What shafts would work and fit with a 3.3 tranny and the stock length of a 2.5r chassis? I have not been able though to find any cvd's that say they work with the 4908 tranny. Am i blind and they do exist or the companies just slow with making aftermarket parts?
Will these work possibly?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=140266024422
First I am looking at getting a 3.3 tranny off ebay. Is there a difference between the 4908 and the 4909 3.3 tranny? I'm guessing they are both the same, though not too sure. On ebay though it looks like it is mostly 4908's getting parted out.
Also I have my 2.5 clutch bell on my 3.3 engine. Will that work for the new tranny cause the 2.5 spur has 72 teeth while the 3.3 has 52 teeth or do i need to get a new clutch bell with a different pitch and # of teeth to work with the 3.3 tranny?
Second part is that I also want to upgrade my drive shafts to cvd's. I can tell that my 2-3 year old stock shafts are getting stressed and worn out and will die most likely some time soon with the bigger engine so might as well do it all in one go i figure. I want to at least do the center shafts for now but i still want to know what people have used and tested for shafts going from the diffs to the wheels for future reference. (Trying not to go broke while out at school ) What shafts would work and fit with a 3.3 tranny and the stock length of a 2.5r chassis? I have not been able though to find any cvd's that say they work with the 4908 tranny. Am i blind and they do exist or the companies just slow with making aftermarket parts?
Will these work possibly?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=140266024422