.15 tmaxx is it worth a 100 bucks

[mtaylortank]

the spur gear spins and the shaft on the front oppisite side of the spur gear spins but the truck doesn't move


thats why i asked about the pins

 

[rybredd]

so i went with everyone and i didnt buy it. My father in law on the other hand did. got it last night and today i got it running kind of. fuel lines are gummed up and the pin for the lower a arm pin is bent. but its really promising. the guy told me the trx 15 ran but he put the fantom 15 on cause he wanted to see what it would do with a bigger engine lol. so any advise on bring this old engine back to life?

take it apart and clean it... if the lines are gummed, the engine probably is too..seal it with some permatex, and try the factory needle settings.......may need a piston/sleeve if theyre still available

 

[vmswimfan21]

sorry matt wasn't meaning to sound snappy it was just 5 am when and i could think of any other way to put it tore down the tranny tonight and i think someone that didnt know any better tryed to adjust the shift point and cranked the set screw all the way in so the pawl couldnt catch the housing(not sure what everyone would call it). got it all back together and the father in law was suposed to meet me at 8 to see if i got it fixed(had him take the glow plug igniter home to charge it last night) and he never showed up

the spur gear spins and the shaft on the front oppisite side of the spur gear spins but the truck doesn't move


thats why i asked about the pins