I’ve been looking for 12mm to 14mm hex’s anything like metal
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Just and idea for my slash cause I want to put 14mm hex Hoons on itThe only ones I know of are strc. They come in 2 widths, a wider front for offset arms and wheels, and a rear narrower offset. I had to buy 2 sets for equal length arms.
They come in green, red, blue, and most likely black and silver.
http://www.teamstrc.com/index.php?route=product/product&product_id=1143
https://www.ebay.com/sch/i.html?_nkw=strc+14mm&_trksid=p2380057.m4084.l1313
I bought these to run rpm widemaxx 3.2 wheels for a tmaxx with stampede 2.8 tires stretched over.
What car is this for?
Arrma makes 14MM metal hexes: https://www.arrma-rc.com/en/product/wheel-hex-metal-14mm-2-blx-3s/ARAC9472.html or https://www.amazon.com/Hobbypark-Aluminum-Granite-Replacement-AR310871/dp/B08LDNXRLK?th=1 or https://www.amazon.com/Aluminum-Wheel-Hex-Adapter-14mmx12mm/dp/B01FO42U8GI’ve been looking for 12mm to 14mm hex’s anything like metal
See if you can find the dimensions for the Slash axle, then match that to one of the Arrma ones. From what i have found, the Slash axle is 5MM, and the Arrma is 6MM. You might be better of with the 12MM to 14MM adapters. I have never tried an Arrma hex on a Slash. I just stick with 12MM hex wheels, since there are way more options. For street tires, look at the Pro-Line street fighter, or the many options from Duratrax, and there are many other street options. For that matter, what about the tires from the Team Associated Apex 2 Hoonitruck? https://www.associatedelectrics.com/teamassociated/cars_and_trucks/Apex2/Hoonitruck_RTR/Will the Arrma 14mm hex fit on a slash?
Because I tried to put a different Arrma one on my slash and the hole wasn’t big enough
The 14MM DBoots Hoons are closer to 1/10TH scale than 1/8TH or 1/7TH. Yes, Arrma list the Vendetta and Infraction mega as 1/8TH scale, but, compare them to the specs for the Arrma Senton and the Arrma Granite. The "1/8TH" scale ones for the Vendetta are smaller than the Senton's Fortress SC. These are the specs for the 14MM Hoons for the Vendetta:The 1/10 touring tires are to small that’s why I wanted to fit the 1/7 or 1/8 Dboot Hoons on it