xtm mammoth st

[rc-kev]

xtm mammoth st (UPDATED)

hi i just got a xtm mammoth st i am having probs with i can't seem to get it to tic over so i set hsn / lsn back to factory set still no joy.

i mave manage to get to tic over but only by having a gap of about 4-5mm and not the norm 1mm any ideas on this

many thanks
rc-kev

 

[Rolex]

Return the idle setting to normal. The problem is with your LSN. Make sure the carb is primed, then lean the LSN by about 1/8 turn. See what happens, and let us know. Don't go twisting the needle all over or we won't know what to tell you next. Post here, then we'll advise you again.

 

[rc-kev]

right i tryed that and still no luck.....but i seem to have this missing
http://imgcash3.imageshack.us/img389/8666/xtmcrab.th.jpg

the black rubber thing marked in the pic could this be my prob

many thanks
rc-kev

 

[rc-kev]

i think i have found my prob i have a sticky carb other the getting a new carb is there a fix for this or is it best just to buy a new carb