Xtm 24/7

[tbbh-teacher]

I have an xtm 24/7 with my savage. I bought the truck used and it didnt come with any manuel for the engine. Could someone tell me what the stock setting on the lsn and hsn are for this engine the web site kinda suck for stuff like this. THanks alot i appreciate you guys helping the noob out alot. One day i will learn to tune my own engines better.

 

[retarded pilot]

I'm in the same boat i bought one used ..i found this thread, look at post 3

https://www.rcnitrotalk.com/forum/showthread.php?t=5579&highlight=24.7+setting

 

[wannarunem]

i didnt find the stock settings , but this may help. I will continue looking for the settings. if either one of you find it before I do let me know.

http://media.hobbypeople.net/manual/146027.pdf


Well, Not much out there but a few posts on other boards suggesting a setting.. but nothing concrete. I believe this is the companies contact email. I'm sure they can tell you.

[email protected]

 

[digger]

hsn is 3 turns
I think the lsn is supposed to be flush with the end of the throttle barrel.

My book says:
While holding the barrel open turn the lsn in all the way. Then back out 8 turns.
Couldn't get that to work on my X-term. The lsn was out too far. But I haven't tried on the Mammoth. Both are flush with the barrel, so that should get you started.

 

[tbbh-teacher]

Thanks i will try those settings and see if its easier to adjust.