Sold / Found wtb savage throttle arm pivot thingy....

[beason]

title says it all. need the little arm that the throttle pivot screws to.

the set with it in there is $9.95 on tower, and i dont need the other bits. i would like to go aluminum but that one is 18 bux.. anyone got a spare one?

could also use a few button head coarse thread screws if ya got them.


EDIT: still looking for the pivot arm.

 

[Monkey Wrench]

I may have what you need, but if you can post a picture of what you're looking for or the link to Tower, I can tell you for sure.

I can't seem to find, "throttle arm pivot thingy" listed in the parts section.

 

[sweetdiesel]

I have a bunch of button head coarse screws. PM me your addy and I'll send them over. State what size you need otherwise you'll just get them all.

 

[beason]

http://cgi.ebay.com/HPI-SAVAGE-21-2...ryZ44028QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

thats the aluminum one. the one on tower is in a parts tree and you really can't see it.

its the arm that screws to the tvp, then the L pivot screws into the top of it.

its touching the thumb screw on the brake linkage, has the L pivot and linkage connected to it.

hidded behind the tank guard on that one, has a white spring in front of it



EDIT: sweet, ill take em all if you dont want the, can never have enough screws!!! pm sent.

 

[sweetdiesel]

I always wanted to upgrade mine to aluminum when I used to have a Savage. I felt that the plastic one had too much slop and flex. It might be worth the $18 upgrade.

 

[beason]

yea, i probibly will later, I'm just tring to get it back together right now and I've already spent amost $50 on a "rtr" truck....

the flex is really bad if you use a trs and hi torqe servo.... lol

 

[sweetdiesel]

Just a question, but why is there a servo saver mounted to the L arm?

 

[Monkey Wrench]

I'll check when I get home from work and see what I got, my man.

 

[beason]

Just a question, but why is there a servo saver mounted to the L arm?

ionno not my truck, i "stole" that pic form google lol

edit: thanks MW lmk what you got!

 

[Monkey Wrench]

Sorry brother, no joy on the part.

 

[beason]

anyone else have one?? i really dont wanna pay 10 bux for the tree....... BUMP!!

 

[beason]

bump it up... someone has to have one...

 

[HeartBreak]

I think I might have an extra one... let me dig thru my parts pile and see.... Is it the one that screws to the TVP, or the one that screws on top of that one?

edit; I got 'em both, brand new never used. The screw, you'll hafta supply, but I have both parts (pivot and mount).

 

[olds97_lss]

I used the one out of this but instead of nylon washers, I used bearings:http://www2.towerhobbies.com/cgi-bin/wti0001p?&W=000426515&I=TRAC4843&P=K

Much less slop and flex.

 

[jon2]

edit; I got 'em both, brand new never used. The screw, you'll hafta supply, but I have both parts (pivot and mount).

I am sure there are others thinking this...huh?

 

[beason]

i got the screw.. how much ya want for it heartbreak?

edit: i need the part that screws to the tvp, but ill take both if you dont need them

 

[HeartBreak]

You're in luck; outta the two, that's the new one.