Sold / Found WTB, HPI wrench from MT2 kit

[RatzoRC]

I know someone has to have this.
I'm looking for the turnbuckle wrench that comes with the MT2, MT2 ss kits.
Part # is Z960.

If anyone has this, and doesn't need it, please LMK.

 

[racin_38]

i have 1 thats very similar to that thats too small for my savy
it has both the ends you need at 1 end and a little grooved slot at the other i tried to find it in tower to show you a pic but i can't find it ,
if you want it pm me your addy and i will mail it to you
no problem

pm sent
it will go out today to you ,
take care
rick

 

[RatzoRC]

Thanks Racin_38.

I appreciate it.

 

[MustangMan]

Ratzo, if it's the same one that comes with the RS4 Evo, then hell, I've got three of them!

Let me know if Racin's doesn't work and I'd be glad to "repay the board" by sending you one of mine...

LMK...

 

[racin_38]

hey bud it went out this afternoon ,
should get it wensday at the latest thursday
and your welcome,
ttyl
rick

 

[ZANDOR]

YA baby Thats the love I like to
see

 

[RatzoRC]

Mustang man, Your on!

Racin_38, thank you.

Zandor, your right. These are nice guy's.
I can feel it.

 

[rossb]

I've got a couple of those as well. LMK if you don't get the one that was mailed.

 

[RatzoRC]

Thanks Ross.

One side is 4mm, and the other side is 5.5mm.
If that helps.
Thanks again guys.

 

[rossb]

No problem.

 

[MustangMan]

Ratzo...

Just got back from a business dinner and dug them out of my box. There's the "X" wrench with the three hex ends and one ball cup end and then there's the little "open end" wrench that is just flat steel with two open ends.

Let me know which one you need (if Racin's is not the right one)...

Can post a pic too if it helps...

Later....

 

[RatzoRC]

Thanks bud but thats the same as racin38.
Wrong wrench but a good attempt. (thanks Rick)

here it is

 

[MustangMan]

Ratzo, not to be an ass, just trying to clarify. I described TWO wrenches and you said "wrong wrench" (singular)... Didn't know if you meant both are wrong or you didn't see I described two different wrenches.

Just trying to help here, so let me know.

Again, pics if you need them... (your image isn't working at the time of my post)

Strange though, I don't see the part number listed in my MT2 manual for the flat wrench, which is what I'm thinking you are in need of...

 

[RatzoRC]

Thats a link to tower.
Mustangman, i'm sorry.
I'm doped up on Allegra D, and not paying attention. ô¿ô
It has to be that exact wrench. Thanks.


http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXVK15&P=7

 

[MustangMan]

No worries Ratzo, just checking...

Sorry dude, but I don't have that style wrench. If you look at the bottom of the Tower Hobbies site it mentions it in the parts list for the Nitro Rush RTR, not the MT2. You might want to make a new post looking for Rush owners to cough up a wrench.

Sorry I couldn't be of any help...

Hope you feel better...

MM

 

[Tweak]

I don't know if I am thinking like Ratzo, but isnt that a pretty universal wrench? Aren't the turnbuckles usually the same size and such? If so I have a couple of the wrenches to tighten/loosen the shaft that connects the ballcups on either side of the throttle and steering...

 

[RatzoRC]

There are only a few that will do 1/8 scale turnbuckles.
I was just looking to see if anyone had THAT one in particular cause I know it fits.
I lost mine from my MT2.

 

[MustangMan]

If you got it from your MT2 they must have changed wrenches and went with a cheaper one. Mine is flat steel like that, but silver, and doesn't have the double sized end like the one in the link.

Good hunting Ratzo!