So I was running my 2.5 with black trans. When it quit moving but was still running so I began to tear it down and got to the trans. Tore or apart and found a broken pin in the case. Finished tearing our down and found its a set pin for one of the gears. it goes in the bottom of the two speed is this a normal problem
Welcome to RCTalk
Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Nitrotrout
Nitro Junkie
Supporter
Yeah it happens occasionally. If your spur gear tightened fully, maybe back it off a smidge (counter clockwise)
Since your tranny is already disassembled, this is a great opportunity to install a FOC (forward only Conversion).
That is unless you really depend on reverse. Personally, I think it's more hassle than its worth.
http://www.ebay.com/itm/Traxxas-T-M...293?pt=LH_DefaultDomain_0&hash=item2a499216cd
Since your tranny is already disassembled, this is a great opportunity to install a FOC (forward only Conversion).
That is unless you really depend on reverse. Personally, I think it's more hassle than its worth.
http://www.ebay.com/itm/Traxxas-T-M...293?pt=LH_DefaultDomain_0&hash=item2a499216cd
- Thread starter
- #3
I forgot to mention that I had put all 12 pegs in the spur gear. I got a new pin that is a little larger than stock. Just had to drill the hole a size larger in the two speed shaft. Hopefully it will make it last longer.
Similar threads
