Will this motor fit?

[AC48]

Hey,

I'm looking at other ways to increase power other than batteries, so will the HPI Micro Modified Motor fit in a Micro Street Force?
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXAYU7&P=ML

If not, are there any motors that will fit that is a good increase in performance??

Thanks guys.

 

[Rolex]

For a serious increase in speed, power and run time, there's nothing like a Mamba brushless.

 

[AC48]

I know but I don't want to put much more than 20-30$ for a decent micro modified motor. Do you know if it'll fit?? I wouldn't see why it wouldn't but I want to make sure before I go and buy one.

 

[PiErow]

The mamba will not fit in a streetforce. Or at least i dont think. The street force runs a 180 size motor. I know of another 180 for 40 bucks. I will post the tower link.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXBEF4&P=7

or

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXBEF5&P=7

 

[AC48]

Does the HPI Micro RS4 run a 180??? That Orion Elite Modified you said is a 180, under the description its says that it fits the HPI Micro RS4, so the HPI Micro Modified should fit my Street Force, right?

Thanks for your all your help guys, I'm a noob to electric...

 

[GilBeQuick]

I've heard that you can run a big block in the MSF if you just drill out your motor mount plate for the different screw pattern. For under $20, this motor will make it a little faster than stock: http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDBJ9&P=7

 

[AC48]

So with that motor I'd have to drill out holes, do I just make the origional ones bigger or do I have to make new holes?

Or what about this motor http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGFM6&P=7 ??