Will E revo wing fit 3.3?

[nitrobasher]

Are the rear body mounts/bulkhead the same on the e revo as the 3.3/2.5? Looking at a deal on a wing, but it's off a e revo (1/10...not the 1/16) Anyone know if it will go on without too much rigging?

 

[nitrobasher]

Oh... and what about a t maxx too? Do it and the revo share any back end parts?

 

[frickenjoey]

Very few parts other than some misc hardware are the same between the T-maxx and Revo. As far as the wing I am not sure. Check out the IPB on the Traxxas site it will give you the part numbers for the bulks and body mounts. See if they are the same.

 

[olds97_lss]

I'm 99% sure the wing mount I have was for the e-revo, although, my rig is a 2.5R revo (older one). It bolted right on without issue. They didn't have the wing though, so I just picked a generic proline buggy wing and put holes in it myself.

I bought two wing mounts as it looked pretty fragile. After many bad landings, the first one hasn't cracked yet.