• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

what happend

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Q

qaart

Gone - bye bye.
Messages
1,038
Reaction score
0
Points
0
Location
east texas
RC Driving Style
  1. Bashing
  2. Racing
i pretty much rebuilt my whole revo and for some reason the front doesn't sit up as high any more
 

Attachments

  • revo 3.3.webp
    revo 3.3.webp
    46.2 KB · Views: 126
Looks like you either have the wrong rockers and/or push rods installed in either the front or rear to me.
 
i got the big rockers in the back and smaller ones in front is that rite
 
Does it look right?
 
NO IT DOESN'T LOOK RIGHT!

Your fist post plainly shows that.

Look at your manual. If you don't have one then go to Traxxas.com and download one.

You use the same rockers and rods on both the front and rear.

:doh::doh::doh:
 
Your ride height looks okay to me. Did you change your ride height setting through the pushrods or shock collars? Maybe something is different there.
 
the rods are in the second on on the front and back. and shocks are all the way out
 
Going to the innermost hole for the pushrods will add some ride height. Were your push rods always mounted to the middle holes on the arms?
 
hey man if your still coming to longview this weekend for the car show i will get it all straightened out for you
 
You really need to RTM! That means "Read The Manual." It will help with these kinds of problems in the future. Also, if you goe to the Traxxas website they have parts explosions of their vehicles that can show you where the parts go.
 
i dont have the manual. and i looked on traxxas and couldnt figure it out. but i put some 120 on the front
 
hey man if your going to make it to the rc event tomorrow in longview make sure you bring your revo and the parts and i will get it back together correctly for you. running 2 different sized push rods on your revo is not good for it.
 

RC Builds

Back
Top