Sold / Found Want To Buy Maxx Stuff!

[jon2]

Ok I am looking to get some stuff to fix my brothers Maxx and maybe upgrade mine. I am looking for the following.

I am looking for:
1.)CVD's all around and the F/R Center's Deal Pending with FastEddy

2.) Stock fuel tank or tanks.Buying from Lessen

3.) RPM Arms al around. Buying from FastEddy

4.)Sirio Big Bore Pipe BOUGHT FROM JFISCHER

5.) bumper mounts.Buying from from Lessen

6.) Bulkheads Bought Rears on different thread by OLDS97 still need FRONTS

7.) RX Rechargeable pack.Buying from FastEddy

8.) Motor saver air filter no neck.

9.) RPM knuckles with bearings!


LMK what you got and what you want for it.


Jon

I do Paypal ONLY.

 

[jfischer]

I have two used pipes for a Maxx, either a Sirio BB pipe, or the Ritter racing pipe. Drop me a note if you are interested. I can ship for $25 each

 

[jon2]

Dude I want the Sirio. Can you shoot me some pics or post them here? I want to see the condition of them. The Ritter..heard of it but never really seen or heard the performance from it.

Let me know

Jon

 

[Lessen]

Bumper supports, front/rear (stock, like new)
Bulkheads, rear (stock, like new)
"2.5" fuel tank (stock, like new)

$15 shipped

also have this New Era fuel tank Brand new, never used yours for $15

 

[jon2]

Thanks Lessen.Can you give me pics? Is the tank complete? No fixes? All parts have threads in tact? Is the price for all?

PM me your Addy Just in case.

 

[Lessen]

I just updated my post. I have another tank, although it's for a .21 conversion. Just figured I'd throw it out there anyways just in case you were interested. Unfortunately, I don't have a digi cam. Only other way I could get pics is to take regular photos and scam 'em. Honestly though I don't wanna waste a roll of film for 4 pics ya know... The stock tank is in fine condition. The 4 mount screws are still installed as is the pressure nipple. . If I remember correctly the output line doesn't have a regular metal nipple to begin with. the lid with o-ring is good and the spring is still nice n tight. The bulkheads and bumper supports are good to go as well. No cracks, or stripped screw holes except for one of the mount holes in one support is a tad wide... and I mean tad. like a 1/16 probably (trying to be as descriptive as possible). But that particular hole doesn't need to be threaded anyways as the screw just needs to be tight in the bulkhead brace. The brand new New Era tank is just that, brand new. Nipples aren't even installed, have them and all mounting hardware still in original package. All the used stuff together is $15 shipped . The brand new tank is an additional $15 shipped.

 

[jon2]

Hmm. is the New era bigger or smaller than the stock tank?

jfischer ---> Where does the stinger point on the Ritter? pics please.

 

[jfischer]

jfischer ---> Where does the stinger point on the Ritter? pics please.

Here is you a pic of what the pipe looked like on the truck when I put it together, Have to take some of it, and the Sirio pipe now. They both have the standard wear on them, but both performed fine on the trucks, I just don't run a small block, or a T-Maxx anymore.

 

[RushRC]

I have the Motor Saver Airfilters new complete for $12.99
http://www.rushrc.com/modules.php?name=Shopping_Cart&file=product&c_op=viewprod&prodID=2
LMK

 

[Lessen]

Hmm. is the New era bigger or smaller than the stock tank?
.

The New Era tank is 125cc. I believe that's the same size as stock, but I don't know where you'd put it w/o any modding, looks like a nice tank. It has a stone filter in it. If you want the other stuff with the new tank instead of the used tank I'd say $20 shipped

 

[FastEddy]

https://www.rcnitrotalk.com/forum/showthread.php?p=230829#post230829

 

[jon2]

jfischer-- how about pics of the sirio Big bore please?

Lessen . PM me with your Paypal addy. I will take the stock tank and bumper supports from you.

ED. I am looking in your post now deciding. Nice stuff

RushRC You will be hearing from me. That is a great price. Is it shipped? LMK



Thanks fellas

Jon

 

[RushRC]

RushRC You will be hearing from me. That is a great price. Is it shipped? LMK



Thanks fellas

Jon

Add $2 for shipping

 

[jfischer]

jfischer-- how about pics of the sirio Big bore please?

Thanks fellas

Jon

Jon, there are a few pics of the pipe attached, it should give you a good representation of it for you, or anyone interested. I will leave you PM with my PayPal address if you are still interested.

 

[jon2]

Jon, there are a few pics of the pipe attached, it should give you a good representation of it for you, or anyone interested. I will leave you PM with my PayPal address if you are still interested.

I am interested but which was better for all around performance? Let me know so I don't wait! Lol

ED and Lessen.. Wel will talk tomorrow!

Thanks

Jon

 

[jfischer]

That is really a hard question. The Ritter pipe to me had a great bottom end and mid range. The Sirio seemed to have more of a top end, but I used it on small block engines that had been ported pretty good, so they had more RPM range then the engines I tried the Ritter on.
Both are fine pipes and I found them easy to tune with.

I am interested but which was better for all around performance? Let me know so I don't wait! Lol
Thanks

Jon

 

[jon2]

Hmm I may be able to get my brother to get one. Deal for two? I want both so I can see the actual difference. Let me know.Do they use the stock pipe mount?

 

[jfischer]

Yes, you use a stock header for these and a standard style rubber flange that goes between them. I have found the GS or most any good flange to connect a 2 piece pipe will work fine. Weight to ship both of them might be over the priority mail weight, but would try to send them both out in the same package that way. (You can send me a PM as to where the ZIP is and I will check on shipping) I can take you a pic of the Ritter pipe also (it is in the pit box in my race trailer right now), the one you saw was when it was on the truck and new, it is the same, no dents or such, it is just the paint isn't as shinny (seems they don't use the best of heat paints on them) but pipe itself is in fine condition, just the paint is not as black. I think I can ship both out for $48 and take the hit for whatever PayPal charges on them.

Hmm I may be able to get my brother to get one. Deal for two? I want both so I can see the actual difference. Let me know.Do they use the stock pipe mount?

 

[jon2]

Yes, you use a stock header for these and a standard style rubber flange that goes between them. I have found the GS or most any good flange to connect a 2 piece pipe will work fine. Weight to ship both of them might be over the priority mail weight, but would try to send them both out in the same package that way. (You can send me a PM as to where the ZIP is and I will check on shipping) I can take you a pic of the Ritter pipe also (it is in the pit box in my race trailer right now), the one you saw was when it was on the truck and new, it is the same, no dents or such, it is just the paint isn't as shinny (seems they don't use the best of heat paints on them) but pipe itself is in fine condition, just the paint is not as black. I think I can ship both out for $48 and take the hit for whatever PayPal charges on them.

thanks for the deal! my zip is 93003

 

[jfischer]

thanks for the deal! my zip is 93003

Here are you two pictures of the Ritter pipe, as you can see it is in great shape, just their paint job isn't the best, or should I say lack of.
I left you PM with my PayPal account name.